Description
The 10” driver was designed around a larger lightweight, high-quality, non-pressed paper cone that is coupled to high-temperature air-cooled voice coil.
Featured is a contrasting red anodized, solid billet aluminium phase plug that is attached to an oversize magnetic motor system with a copper shorting cap, allows this driver to deliver a HiFi quality sound experience at extreme volume levels.
| Specifications | |
| Nominal Power (RMS) | 120 W |
| Max / Peak Power | 200 W / 300 W |
| Woofer Size | 10″ (25 cm) |
| Magnet Size | 100 mm / 4″ |
| Cone Material | Non-pressed paper |
| Impedance | 4 ohm |
| Sensitivity | 92 dB |
| Mounting Depth | 95 mm / 2.56″ |
| Mounting Hole Diameter | 145 mm / 5.7″ |
| Resonant Frequency (Fs / Fo) | 76.127 Hz |
| Moving Mass (Mms) | 27.413 g |
| Diaphragm Mass (Mmd) | 25.616 g |
| Mechanical Q (Qms) | 3.318 |
| Electrical Q (Qes) | 0.808 |
| Total Q (Qts) | 0.650 |
| Equivalent Compliance Volume (Vas) | 10.351 L |
